Gun Belt - Single Stitched
  • Gun Belt - Single Stitched


    Made of two layers of vegetable-tanned cow hide and totaling nearly 1/4″ thick, our leather gun belt is dyed a single base color, can have airbrushed accents and the back side of the belt will be left natural to minimize dye transfer to your clothing. Our default belt width is 1 1/2″ wide.  Thread colors will be available in our standard offerings.  To refer to our standard color options, please visit our Colors page. We are not offering internal stiffeners at this time.



    When ordering your leather gun belt, please do not select your belt length based on your pant size. Refer to the graphic in the image gallery – Using a tape measure and your current belt, measure from the inside edge of your buckle (Point A) to the hole you normally use while carrying your firearm (Point B). If you also wear your belt when you are not carrying your firearm, you may wish to give us a measurement between the two Point B measurements.


    For example, if Point B measures 41″ when you ARE carrying, and 39″ when you are NOT carrying, you may wish to order your belt at 40″.


    As a final note, please remember that even though these belts will be stiffer than a typical department store belt, you still need to adequately tighten your belt to minimize sag and stabilize your firearm. Please take this into consideration as well when you are figuring out your desired belt length measurement.